YesWelder FIRSTESS®️ Welder & Cutter | new arrival

FIRSTESS MP200

The MP200 is a versatile and powerful 5-in-1 welding machine specially designed for home DIY or maintenance projects. It can be used to weld MIG (GMAW), Stick (SMAW), Gasless (FCAW), and TIG (GTAW). YesWelder MP200 also allows you to cut at the same time. Suitable for both home DIY and industrial projects.

FEATURES

Synergic Controlled on MIG function, very easy and simple operation.Gas MIG/Gasless MIG/Lift TIG/Stick/CUT 5 in 1Can take up to 0.9mm(.035″) MIG solid wire(Gas MIG) and 0.9mm(.035″) MIG FLux wire(Gasless MIG)Apply to D100/D200 rolls (<10lbs) of MIG wireIdeal for 7018/6011/6010 electrode Smart Memory & System Reset

ADVANTAGE

This image has an empty alt attribute; its file name is 83cc9e7549aee2b40a81080e1dfa20ce_original-1632456264871.jpg

4.3” LCD Display
4.3” high-pixel LCD control screen that quickly and easily walks the user through setup,smoothly flow through the on-screen menu system and choose the setting. 
Digital control to choose welding mode, material, welding wires, tungsten rods, electrode and workpiece thickness.
Color LCD display easy to read and set amperage and wire speed for repeatable welds every time. 

Synergic MIG 

  • Full Synergic Option: with automatic change of the voltage & wire feeding speed by choosing different thicknesses or amperage.
    The wire feed speed will be well fit with the amperage.And micro-adjust voltage is available. 
  • A perfect guide for new welder and beginners. “Out Range” Warning: if the amperage/ wire speed is not relative to the MIG setting, there will be a warning showing value from Green to Red. 
  • It will warn that it may be out of the recommended relative values for voltage and wire speed. Spot and Burn Back Control: Allowing spot welding and time delay at the end of a weld, suitable to different welding requirement
  • Note:  Red MP200 is compatible with the MIG kits in kits pack MP3A only, while Black MP200 is compatible with YesWelder YW-100L-0.9 MIG kits, common Lincoln Magnum 100L and Tweco Mini/#1 

Smooth TIG

  • Equiped with a TIG torch and easy to scratch to initiate arc ignition.Supplying stable controllable consistent arc, suitable for small or intricate welding projects.
  • Allowing clean and quiet, virtually smoke-free welding with 100% Argon.

Powerful Stick

  • Exceptional DC stick welding provides excellent fusion and bead characteristics.

    Built-in hot start and arc force allows capability of welding with E7018 electrode&E6011 E6010 cellulose electrodes.

    Electrode up to 1/8″ (3.2mm) @110V, 13/16″ (5mm) @220V.

    Apply to 13/16″ (5mm) @110V, 9/32″@220V.

    Brief and clear connection icon could be a good reminder for different electrode requirements.

Clean Cut 

  • The preflow is a purge feature to insure there is airflow at the tip to become a charged plasma stream and benefit for blowing clean cuts.
    Postflow is primarily for cooling.the longer the cut at high amp on thick metal, the more post flow need to dissipate the heat.

    Recommend air pressure: 58-72 PSI.
     
    Max Severance Thickness: 15/32″(12mm)@220V@40A, 5/16″(8mm)@110V@30A.

    Max Clean Cut Thickness: 25/64″(10mm)@220V@40A, 15/64″(6mm)@110V@30A.

HUMAN FRIENDLY INTERFACE

Auto Smart Memory 

  • The smart Memory function allows you to store the voltage and current settings that match your style under memory numbers. 
  • The memory number can be recalled to reveal and use the weld parameters stored, and weld parameters can be further adjusted and stored as required. 
  • Up to 10 memory options for each type of welding can be memorised and stored for recall.

Choosable Unit System

Adopts both imperial and metric systems of measurement. Better understanding and easier operation for welders in most of all countries in the world.

System Reset 

When the machine is perfoming uncharacteristically,all the welding parameter is able to be restored to the factory setting.It will reset theprimary log data, process logdata, and error log data. 
Contrastsettings, motor calibration settings, Spoolmate Calibration set-tings, Burn-In information, and Software information will all beretained.
It could be used to prepare a device for donation or other transfers of ownership by removing personal data and configurations associated with the previous owner.

PRODUCT DETAILS

1.Multiprocess 

Capable of MIG (GMAW), Stick (SMAW), Gasless MIG (FCAW), and TIG (GTAW) and Plasma Cutting into one lightweight package. 

2.Dual-Fan Heat Dissipation 

Two high-speed fans keeps the cooling quick and quiet.  The Seven-Leaf Design let more air in. 

3.Dual Voltage 

Allows the machine to run directly on 110 V 50/60 Hz power or on 220 V 50/60 Hz with the use of a power adapter.

SPECIFICATION

PRODUCT DETAIL  

Product weight: 28.55lb

Product Dimensions: 20.08″*11.02″*6.10″

Supply Voltage: 110V/220V 50/60 Hz

Input Current:  45A@110V,  30A@220v  

Output Current: 20-160A (MIG/TIG/STICK)  20-30A (CUT) @110V;
                              20-200A (MIG/TIG/STICK) 20-40A (CUT) @220V;

Duty Cycle:
110V: MIG/TIG/STICK 60%@160A, 100%@123A 
220V: MIG/TIG/STICK 60%@200A, 100%@154A 
CUT:  60%@30A, 100%@23A@110V, 60%@40A, 100%@30A@220V

Air Compressor Recommendation:9-12CFM@ 78PSI

Pre/Post Flow Time (CUT): 10s

Can apply to 2 and 10 pound rolls of wire, .030″/0.35″

Welding Material: Carbon Steel, Stainless Steel

Protection Class: IP21S

PACKAGE INCLUDES

  • 10′ YW-L150-10E 200A MIG Torch 
  • 10′ Electrode Holder & Cable
  • 10′ Earth Clamp & Cable
  • 8′ Gas Hose with 5/8″-18 RH
  • 13′ PT31 Cutting Torch
  • 13′ WP-17V TIG Torch
  • Additional .030″ & .035″ contact tip
  • 220V->110V Power Adapter
  • Brush
  • 8′ Air Hose
  • .030″ & .035″ W-Groove Roller (Flux Core Wire)
    .030″ & .035″ V-Groove Roller (Solid Wire)

You may also like