MIG-250PRO-SG

The YesWelder MIG-250PRO Welder is suitable for any Do-It-Yourself, Maintenance, Repair, Metal Fabrication, and Hobbyist project.

FEATURES

• MIG Synergistic & Manual Setting  on MIG function, easy and simple operation
• 4 Functions in 1: Gas MIG /Gasless MIG / Lift TIG / Stick
• Spool Gun Compatible
• Can take up to 0.9mm (.035″) MIG solid wire(Gas MIG) and 0.9mm(.035″) MIG Flux wire(Gasless MIG)
• Apply to D100/D200 rolls (<10lbs) of MIG wire
• Capability for Steel, Stainless Steel, Aluminum 
• Suitable for 7018/6011 Electrode

FUNCTION

Multi-functions

• MIG synergic setting & MIG manual setting, Gasless Flux wire MIG Welds, stick welds, and Lift TIG welds, MIG Aluminum Welds
• Shield gas for MIG welding: 100% CO2 Fe(Carbon Steel), 75% Ar/25% CO2 Fe(Carbon Steel/Stainless Steel), Flux Wire(Carbon Steel) and 100% Ar AL(Aluminum)
• 5/8″-18RH gas fitting easy to install and remove
• Lift TIG welding optional with additional WP-17V-35 TIG torch
• Suitable for 7018/6011 Electrode for Stick welding

Alternative MIG Setting

• Synergic MIG Setting
   –provides communication between the power source, feeder, and torch
  –allows for automatic change of the voltage & wire feeding speed by adjusting the amperage or thicknesses
  — match the welding chart set in the data. Easy works with new welder or users
• Manual MIG Setting
  –meet the need of an experienced and professional welder by adjusting the voltage & wire feeding speed seperately
  (The amperage will change with the wire speed)

Aluminum MIG Welding

• The unit is capable of welding aluminum using 100% Argon.
• Method 1.
• Equipped with a U-typer Roller(.035″& .045″), special A+ tips and Graphene Liner for the MIG torch, and removing the holding ring on steel liner of wire feeder. 
• Setting should be in Synergic MIG/ Manual MIG mode when welding aluminum.
• Method 2. 
• Switching to spool gun mode. Install a spool gun and weld in manual MIG mode for Aluminum.

Digital Display Control

• 1.Welding Mode Selection: Manual MIG, Synergic MIG, Stick, Lift TIG, Aluminum MIG
• 2.Welding Materials Selection: Carbon Steel/Stainless Steel, Aluminum
• 3.Menu Selection
• 4.Wire Diameters Selection:  .023″/.030″/.035″/.045″
• 5.Value Adjusting Knob:
  Synergic MIG Mode–Allowing automatic change of the voltage & wire feeding speed by adjusting the amperage. Welding Voltage Micro Adjusting -5~+5(-1.5V~+1.5V),Wire Feed Speed can not be adjustable.
  Manual MIG Mode–Adjustable Welding Voltage (12.5-30V); Wire Feed Speed(2-15 m/Min)
• 6.Manual Wire Feeding

Wire Recommendation

• Compatible with 2-lbs and 10-lbs welding wire（4″ or 8″ Wire diameter: D100/D200)
• Suitable for several welding requirements
• .023”/.030”/.035″ ER70S-6 Mild Steel MIG Welding Wire/Stainless Steel wire 
• .023”/.030”/.035” E71-GS flux core wire for  manual MIG setting; only .035” available in  synergic MIG setting  
• .035”/.045” ER5356 Magnesium Aluminum Welding Wire / ER4043 Silicon Aluminum Welding Wire

Note:   
Do not Gas MIG/Lift TIG welding without connecting the gas line.

PRODUCT DETAILS

Quick-selection design

Allowing for easy switch to different welding modes, Gas/Gasless MIG, Stick or Lift TIG

Synergic/Manual Controlled MIG

Suit the needs of hobbyists and professional welders

Various Welding Wire Selection

Equiped with different rollers and  capable of diffenting welding projects

SPECIFICATION

PRODUCT DETAIL

Product weight: 21.72lb

Product Dimensions: 18.11″*8.27″*13.97″

Supply Voltage: 220V 50/60 Hz

Input Current: 30A

Output Current: MIG 30-250A, 20-225A

Duty Cycle: 60% @225A, 100% @174A

Electrode Diameter: up to 5/32″
Workpiece Thickness: up to 13/64″

Welding Material:  Carbon Steel/Stainless Steel, Aluminum

Protection Class: IP21S

PACKAGE INCLUDES

• 10′ Mig Torch
• 10′ Electrode Holder & Cable
• 10′ Earth Clamp & Cable
• Gas hose
• Brush 
• A Graphene Liner

• 1 Additional .030″ & .035″ Contact Tip
• W Knurl Groove Roller: .030″&.035″
• V Knurl Groove Roller: .023″, .030″&.035″
• U Knurl Groove Roller: .035″&.045″

EXPLORATION