CUT-55DS

Non-Touch Pilot Arc Plasma Cutter / Dual Voltage 110/220V / IGBT Inverter Portable Cutting Machine

FEATURES

• Non-Touch Pilot Arc
• Dual Voltage 110/220V
• Powerful 1/2″ Clean Cut
• IGBT Inverter  Technology

FUNCTION

Wide Application 

• 55Amp Non-Touch Pilot Arc Plasma Cutter cuts up to 3/4″. Designed for both demanding industrial and construction work, or home and hobby use
• Cutting Material: Stainless steel, Alloy steel, Mild steel, Copper, Cast Iron and Chrome

Non-touch Pilot Arc

• The pilot arc torch efficiently cuts through rough, painted, and rusty surfaces, while producing minimal slag
• Pilot arc technology allows you to cut without touching the tip of the metal, for better quality and longer consumable life

Powerful 1/2″ Clean Cut

• Max Rated Clean Cut Thickness: 5/16″@110V, 1/2″@220V
• Max Severance Thickness: 15/32″@110V, 3/4″@220V

Simple Display

• 1. Power Indicator
• 2. Overheat Indicator
• 3. Torch Protection Indicator
• 4. Air Pressure Gauge
• 5. 2/4T Function
• 6. Gas Checking
• 7. Cutting
• 8. Current Display
• 9. Amperage Setting

Installation for Air Filter

• 1. Set the connection of gas fitting, the pilot arc and the grounding
• 2. Insert the seal nut to the air filter
• 3. Install the bracket to the two screws at the back of the machine
• 4. Remove the mounting ring from the top of the filter and install it to bracket and re-attach with the ring
• 5. Connect the filter from the air compressor to the machine.(air compressor->air filter->air connector on the machine)
• 6. Release the gas valve by pulling up the top mounting, adjust the pressure of the gas and press the button

Note:   External Air Compressor, need to purchase separately

PRODUCT DETAILS

Portability

IGBT inverter, smaller size and lighter weight, and higher reliability allows you to take to wherever the job is needed.

Built-in Post Flow

When you stop cutting, the air runs on for a minute to cool the consumable of the plasma cutter torch. This will extend consumable life.

Dual Voltage

Capable to run directly on 110 V (±10%) 50/60 Hz power or on 220 V (±10%) 50/60 Hz with the use of a power adapter.

SPECIFICATION

Product weight: 14.55lb

Product Dimensions: 16.14 “* 6.49″ * 11.81”

Input Voltage: 110V/220V 50/60 Hz

Input Current: recommend 63A breaker

Cutting Recommendation:
Output Current 20A @110V @50.8PSI
Output Current 40A @220V @58-65PSI

Duty Cycle: 100%@35A, 60%@55A

Post Flow Time Built-in: 20s

Air Compressor Requirement: 5-7CFM @60PSI

Welding Material: stainless steel, alloy steel, mild steel, copper, and aluminum, and other color metal materials

Protection Class: IP21S

PACKAGE INCLUDES

• 13′ Cutting Torch
• 10′ Earth Clamp & Cable
• Gas Hose
• Air Compressor Filter

• 110V/220V Adapter
• Torch Consumable:
  220V Nozzle (.048″) *1
  110V Nozzle (.032″) *2 Electrodes*3
  Alumina Cup*2